- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
- Maison > Fournir > Fourniture d'acier à ressort de la ligne AISI1050 printemps, les importations d'acier en acier SPS7 printemps
Nom de l'information: | Fourniture d'acier à ressort de la ligne AISI1050 printemps, les importations d'acier en acier SPS7 printemps |
Publié: | 2012-08-09 |
Validité: | 30 |
Caractéristiques: | Compléter |
Quantité: | 1.00 |
Description Prix: | |
Description détaillée du produit: | Traitement thermique 1 L'acier à ressort nécessitant une résistance élevée et limite la fatigue, l'état général de la trempe et revenu pour obtenir une plus grande limite élastique. Technologie de traitement thermique a une influence critique sur la qualité intrinsèque du printemps. Par conséquent, la fa?on d'améliorer la résistance à la fatigue du printemps, des recherches supplémentaires sont nécessaires, en particulier dans le traitement chimique de la surface de la chaleur de modification, de grenaillage et ainsi avoir un impact important sur la vie de fatigue du printemps. Afin de renforcer l'intensité de la surface du ressort de soupape pour augmenter la contrainte de compression, à la fatigue, après la formation de la soupape à ressort à outre, après la nitruration cryogénique liquide carbonitruration ou le soufre et l'azote et le traitement de perméation grenaillage. Par exemple, le Japon f4mm Si-Cr trempe à l'huile à faible température de l'acier, 450 ℃ × carbone corps 4.5h et la perméation d'azote par rapport à la trempe 400 ℃ × 15min, la limite de fatigue peut être augmentée 240mpa. L'azote pénètre, non seulement pour éliminer les effets néfastes de la décarburation, mais augmente également la contrainte résiduelle de compression, dans le même temps augmenté de nitruration et à basse température carbonitruration vanne de liquide de température force du ressort, la déformation de 0,2% (150 ° C lorsque les dispositions de valeur de 0,5%), 250 ° C la déformation de 0,56%, une meilleure stabilité thermique et la stabilité de relaxation résistance du ressort de soupape, mais de nitruration et de carbonitruration temps liquide doit être strictement contr?lée, sinon il sera de former un sulfure de maillage nitrure et de maille, il permettra de réduire sa résistance à la fatigue. Pour améliorer la résistance du ressort de soupape peut également choisir de grenaillage de précontrainte, la production et de pratiquer la surface de la soupape de grenaillage de précontrainte de ressort peut être utilisé deux granulation, d'un diamètre de 0,8 mm,, microdureté 720hv0.2, un autre diamètre de 0,25 mm, sa microdureté 800hv0.2 grenaillage tiers peut obtenir un meilleur effet de renforcement, mais aussi faire de la qualité de surface est améliorée. (2) d'alliage Le carbone est l'élément principal de durcissement en acier, en acier à ressort est souvent plus que les autres éléments d'alliage. Selon les exigences de matériau en acier à ressort en acier allié haute teneur en carbone. Les pays dans le monde du ressort d'acier, la teneur en carbone, aujourd'hui, la grande majorité de 0,45% à 0,65%. Afin de surmonter le problème de la résistance de l'acier à ressort, la ténacité et la ductilité baisse, mais aussi de réduire la teneur en carbone. Chine faibles émissions de carbone en acier à ressort martensitique dans une étude approfondie, comme 28mnsib, 35mnsib, sa teneur en carbone de 0,30%. La pratique montre que l'acier à ressort peuvent être utilisés à faible température de la trempe de martensite en lattes et d'une résistance suffisante et d'excellentes propriétés mécaniques, notamment la plasticité, la ténacité, excellente. La recherche japonais et le développement d'acier à ressort à haute résistance plusieurs, tels que uhs1900 vhs2000, nd120s, nd250s, la teneur en carbone d'environ 0,40%. Le r?le principal des éléments d'alliage dans l'acier à ressort est d'améliorer les propriétés mécaniques, pour améliorer la performance des processus et de donner quelques propriétés particulières (comme la température, à la corrosion). Beaucoup d'acier à ressort au silicium que les principaux éléments d'alliage, il est le moins de résistance à la bombe à la plupart des éléments d'alliage, principalement due à la silicone a une solution forte solide effet de renforcement; le même temps, le silicium peut inhiber la cristallisation de la cémentite dans le processus de trempe formation nucléaire et la croissance du nombre, la taille et la morphologie des carbures précipités trempe trempe d'acier changement de stabilité. à l'heure actuelle, les nuances d'acier nationaux wsi 1,8% à 2,2% en acier à ressort de silicium des plus hautes normes en vigueur. La teneur en silicium est trop élevé, favorisera la décarburation et la tendance de graphitisation de roulement en acier et le processus de traitement thermique, et les difficultés de fusion et de la facilité de la formation d'inclusions, par conséquent, l'utilisation du silicium trop élevé de l'acier à ressort est toujours prudent. Le chrome peut améliorer de manière significative la trempabilité acier éviter si-cr balle recuit tendance en graphite pour réduire la couche décarburée, si commun dans l'acier à ressort des éléments d'alliage, le chrome est le principal élément de durcissement en acier à ressort 50crv L'utilisation de plus vaste. Manganèse est d'améliorer l'aptitude à la trempe des éléments les plus efficaces d'alliage, il est intégré dans la solubilité solide dans la ferrite. Le wmn doit être supérieure à 0,5%, pour rendre le c?ur en acier trempe printemps est entièrement plus en martensite, mais quand plus wmn de 1,5%, la ténacité a diminué, choisissez en acier à ressort devrait être une priorité. Mo peut améliorer la trempabilité de l'acier pour éviter la fragilité humeur, d'améliorer la performance à la fatigue, le Mo dans l'acier existant ressort standard petite, plus la quantité est généralement inférieure à 0,4%. Vanadium est un carbure de solides formant éléments, précipitation à l'état solide de la dispersion mc carbures a un effet de précipitation solide renforcement. 0,11% v 35crmnb acier peut considérablement améliorer la trempabilité d'acier, a également constaté que le vanadium efficace de réduire la sensibilité 35simnb décarburation d'acier, et de vanadium de réduire la solution efficace solide en acier au carbone, pour prévenir la croissance des grains et de prévenir La diffusion aux joints de grains et d'améliorer la résistance à l'oxydation. |
Vous êtes le 100202 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Yao Thai ligne matériau métallique Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie